During construction work, concrete is one of the most commonly used materials. But in order for the cement-sand mixture, which is raw materials for it, is constantly in good condition throughout the work, it is necessary to use special equipment. This is especially true if a large amount of this construction mix is used.
One of the mechanisms that in this case can be used is the vibrator. This unit is designed to reduce the porosity of concrete and at the same time increase its penetration into the cracks. With this option, you can significantly improve the gravity of the material and, as a result, the reliability of the design.
Depending on which parameters are characteristic of the macer of this mechanism, the passage of the unit is also determined. Therefore, the price of a concrete vibrator will largely depend on these indicators. In addition, the more ergonomically the vibrator is made, the more its cost will be. There are not only industrial models on the market, but also portable ones, which have only about 5 kg weight.
Types of vibrators that are available to the consumer today are a lot. Important are especially popular. A feature characteristic of such models – it is necessary to lower the unit directly into the concrete solution. The frequency of vibrational movements of such vibrators reaches about 50 Hz. Dive depth is approximately 1 m.
But the unit may not plunge into the mixture. Then the impact goes on a wooden formwork. It should be borne in mind that with this option, the effectiveness of concrete compaction is slightly lower. But this is the only way to influence the mixture if it is impossible to use a submersible vibrator with a large number of reinforcement.