Embanking slabs are horizontal structures in the form of a thick panel. They are used in construction as a division of floors – on this principle of the floor slab, there are inter -story, basement and attic. The task of the floor slab is to be strong enough to hold the load from the floor, people and objects that are located in the room, and in addition to this, keep the severity of the structures of the structure in interaction with it. In addition, the floor plate provides one or another degree of thermal insulation and sound insulation, depending on the selected type.
Full -bodied iron slabs differ from hollow plates. The former are classified as the most powerful, so they are used in the construction of buildings in cases where the appearance of possible cracks and deflection should be avoided. In multi -storey buildings with the help of slabs with a thickness of 16 centimeters, they control the noise. Hollow slabs are used to reduce the weight of the structure where large spans are needed.
Due to the importance of floors in the construction of houses, the production of floor slabs should take place under the thorough control and with the full responsibility of the plant for its product. Compliance with norms and standing of the thickness of the structure affects the safety and quality of the ceiling of houses. Naturally, the installation of floor slabs also plays great importance in all these functions.
The floor slabs are made of high -quality concrete with high compression strength, and steel reinforcement is placed inside the structure, which enhances the product. Due to this technique, a durable and durable product is obtained.
Crossing slabs can be monolithic – they are created during the construction process at the construction site. There are also prefabricated floor slabs that are made in advance and brought to the construction site as separate parts, and then installed using special construction equipment. The second type of plates is considered more acceptable, as they are cheaper and have more insulation. Maximum thermal insulation and sound insulation can be provided with prefabricated tiles with voids.
There are many parameters for choosing floor slabs, among them the maintained load, dimensions, weight, support methods and other factors. The type of floor slabs is calculated for each construction site by designers and builders.
When storing plates at the construction site, a certain strategy should also be observed. They can only be left in the fresh air by protecting from moisture, while installing them on a flat surface in an amount of not more than three pieces on each other, and there should be a distance of 60 centimeters between the packs of plates.
You can buy Celyabinsk ceilings in a financial construction company. On the FSK website, you will also find more detailed information about the round -the -empty floor slabs and other products. In the assortment of products of the company, in addition to building materials from reinforced concrete, you will find lumber, brick, cement, roofing and facade.